User's Guide

Accent 1000 User’s Guide-Empower 14
Back View
1 Handle 10 USB 2.0 port for Look
®
module
2 Mini USB connector for NuPoint
®
head tracker
11 Replaceable battery (under cover)
3 Attachment point for handle or
NuPoint head tracker
12 Attachment points for Look module
4 Rear camera
1
13 Battery cover screws
5 SD card slot 14 Headphone jack
6 USB 3.0 port 15 Switch jack B
2
7 USB 2.0 ports 16 Switch jack A
2
8 External computer access mini port 17 Charging port
9 QRM mounting plate location (plate
optional)
18 HDMI port
1
Your device ships with a thin transparent protective cover
over the rear camera lens. To remove the cover, carefully
slide a fingernail under the edge of the cover and peel the
cover off the lens. Be careful not to scratch the lens.
2
If you use a switch or switches for access to your device, plug
them into switch jacks A and B. To use a joystick, you will
need a Y-adapter. If you have a joystick plugged in and it
does not respond normally, reverse the way it is plugged in
(plug switch A into jack B, switch B into jack A).
1
2
3
3
4
9
10
12 12
11
13 13
5
6
7
8
14
15
17
18
16
7
DRAFT