User Manual
Table Of Contents
- COPYRIGHT
- HISTORY
- 1.Summary
- 2.Steps to initiate the device
- 3.Introduction
- 4.Device specifications
- 5.How TRK210 and TRK230 work
- 6. How to use TRK devices
- 7. Back cover removal
- 8.SIM card installation
- 9.Battery installation (only for TRK210 model)
- 10.Battery recharging (only for TRK230 model)
- 11.Human interfaces
- 12. Autotest and key provisioning
- 13. Inmolecular
- 14. TRK2XX connection configuration
- 15. TRK2XX advanced configuration
- 16.Accent Systems Support
- 17.FCC
- 18.CE-RED statements
- Bluetooth
TRK2XX Initiation Manual
12
3. Insert a Micro SIM (3FF) in the SIM card holder.
4. Close SIM card holder as is shown in the figure 3.
5. Reinstall the back cover as is explained in the section 3 of this document.
Slide metallic SIM card holder hinge (market with blue
arrow) to the direction of orange arrow.
Insert the SIM card into the guides of the hinge.
Close the hinge making pressure over it in as is indicated
by the blue arrow and sliding in the direction of orange
arrow.
Figure 3 - SIM card installation
9. Battery installation (only for TRK210 model)
For the TRK210 model, the steps to replace the batteries are:
1. Remove back cover as described in the section number 3 of this document.