User Manual
Table Of Contents
- COPYRIGHT
- HISTORY
- 1.Summary
- 2.Steps to initiate the device
- 3.Introduction
- 4.Device specifications
- 5.How TRK210 and TRK230 work
- 6. How to use TRK devices
- 7. Back cover removal
- 8.SIM card installation
- 9.Battery installation (only for TRK210 model)
- 10.Battery recharging (only for TRK230 model)
- 11.Human interfaces
- 12. Autotest and key provisioning
- 13. Inmolecular
- 14. TRK2XX connection configuration
- 15. TRK2XX advanced configuration
- 16.Accent Systems Support
- 17.FCC
- 18.CE-RED statements
- Bluetooth
TRK2XX Initiation Manual
13
2. Ensure to use Saft LS14500 or compatible 3.6 V Primary lithium-thionyl chloride battery.
If any doubt please contact Accent Systems.
3. Use the same batch batteries, do not mixed used batteries with new ones.
4. Insert the batteries in the correct position as is shown in figure 4.
Figure 4 - TRK210 battery compartment with the batteries in the right position. Blue arrows
mark positive pole and orange arrows mark negative pole.
10.Battery recharging (only for TRK230 model)
For TRK230 the steps to recharge batteries are:
1. Open USB lid
2. Insert a Micro USB plug. The power supply current have to be 2 A.
3. Refer to section 7 of this document to know the battery charge status via RGB LED.