Installation Guide

DS#2003!

Description:!Half!Dome!Floor!Mount!Magnetic!Door!Stop

Material:!Zinc!Alloy!and!Rubber

Finishings7Available:!Satin!Nicke l!( US15)!and!any!custom!

finishing

Size:7(Diameter)!45!x!(Height)!3 9mm!(1.5!inches!he ig h t )

Packaging:71!pc!+!Fastener/polybag

Installatio n 7Instructio n s:77

1.!Open!the!door!to!the !point!where!you!want!it!to!stop.!Ensure!the!doorknob!is!approximately!2!

inches!from!the !wall.!

2.!Draw!a!line!where!the!door!opens!to!before!the!wall.!

3.!Find!a!spot!where!you!would!like!to!in st a ll! th e !stop!on!the!floo r . !

4.!Make!a!pencil!mark!1/2!inch!away!door!mark!line,!in!the !direction!of!the!door's!swing!when!

opening.!

5.!Secure!the!stop!on!the!floor,!with!the!magnetic!surface!facing!toward!the!door.!

6.!Find!the!position!on!the!door!where!the!catch!sho uld!go!to !align!with!the!stop. !

7.!Make!a!pencil!mark!on!the!door!in!the!ce nter!of!the !area! where!the!catch!will!be.!

8.!Secure!catch!to!door!using!mark!as!a!guide.!

PAGE 1
DS-2003 Description: Half Dome Floor Mount Magnetic Door Stop Material: Zinc Alloy and Rubber Finishings Available: Satin Nickel (US15) and any custom finishing Size: (Diameter) 45 x (Height) 39mm (1.5 inches height) Packaging: 1 pc + Fastener/polybag Installation Instructions: 1. Open the door to the point where you want it to stop. Ensure the doorknob is approximately 2 inches from the wall. 2.