ABSTRACT iBKS Plus Technical Data AUDIENCE This document is primarily focused for engineers or other users with a technical profile FEATURES Advertising Beacon Device Bluetooth Low Energy® Full Eddystone & iBeacon compatible 100% Configurable Parameters Firmware update Over The Air (OTA) Waterproof performance External button to enable/disable and configure with a status LED Provided with your own configuration (MOQ 50 units) Screws/ flanges/ sticker for deploying Additional optional sensors available FCC &
FCC Statement ...................................................................................................................... 2 1. Specifications ................................................................................................................ 4 2. iBKS Plus Mechanical Draws ....................................................................................... 5 3. Button Functionality ...............................................................................................
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC Caution: Changes or modifications not expressly approved by the part responsible for compliance could void the user's authority to operate the equipment.
l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. RSS-102 Statement: This equipment complies with Industry Canada radiation exposure limits set forth for an uncontrolled environment. Cet équipement est conforme à l'exposition aux rayonnements Industry Canada limites établies pour un environnement non contrôlé.
This section contains electrical, mechanical and software specifications for iBKS Plus Dimensions Weight Core Radio Protocol Distance Range Battery Optional Sensors Firmware Update Idle Current Consumption 84 x 84 x 24 mm 153g (Lithium) 182g (Alkaline) Nordic nRF51822 Bluetooth® Low Energy Case material Case finish Button material Button finish ABS Matte white TPU Matte black 4 AA size Operating Temperature Double side sticker Screws Flanges Related to battery type (see below) Hall Accelerometer Tem
All dimensions in mm IMPORTANT: This chapter applies from firmware version EDSTEID V5.2016.06.29.1 onwards. By default, iBKS Plus comes from factory with batteries already installed. In order to avoid wasting energy, iBKS Plus is set to the off mode*. *In the off mode, the Core is in sleep mode and the power consumption is rated to 3.5µA.
Push button once LED will start blinking for 30 seconds During these 30 seconds, the iBKS Plus is in connectable mode independently of the user mode configured. If the iBKS Plus is locked, the password will be also required to connect. After 30 seconds, the iBKS entries in the user set mode.
Push button once LED will stay on for 3 seconds The iBKS entries in the off mode In this status, the core is in sleep mode and will remain until the user turn it on again. The power consumption in this mode is rated to 3.5 µA. IMPORTANT: If Eddystone EID frame is enabled, even the frame will not be advertised in this mode, the Core will wake up to keep the EID synchronization every defined period of time by the user through EID Rotation Period (K). In that case, the power consumption is rated to 3.8 µA.
IMPORTANT: Battery life estimation applies from firmware version EDSTEID V5.2016.06.29.1 onwards. Notice all values shown in this chapter are just an estimation. Real battery life might differ depending on the environment where the iBKS Plus is placed.
Slots Enabled -30 -20 Tx Power (dBm) -16 -12 -8 -4 91 91 90 88 88 87 84 77 90 90 90 88 88 86 84 77 90 90 90 88 88 86 84 77 92 92 92 90 90 89 87 81 85 85 85 83 83 82 79 73 69 69 68 66 66 64 61 55 85 85 84 83 83 81 79 73 69 68 68 67 66 64 61 54 85 85 84 83 83 81 79 73 70 70 69 67 67 66 63 56 92 87 86 86 85 84 81 76 69 68 68 66 66 64 61 54 68 68 67 65 65 65 61 54 70 69 69 67 67 65 62 56 0 +4 No
Slots Enabled Tx Power (dBm) -12 -8 -30 -20 -16 -4 0 +4 103 102 102 102 101 100 98 93 102 102 102 101 101 100 98 93 102 102 102 101 101 100 98 93 104 104 103 103 102 101 100 96 99 99 99 98 97 97 95 90 87 86 86 85 84 83 80 74 99 99 98 98 97 96 94 90 86 86 86 85 84 83 80 74 99 99 98 98 97 96 94 90 87 87 87 86 85 84 81 75 100 100 100 99 99 98 96 92 86 86 86 85 84 83 80 74 86 86 85 85 84 82 80 73 87
The following table and graph show the RX power received (dBm) in comparison with distance (m) for all configurable TX powers.
IMPORTANT: This chapter applies from firmware version EDSTEID V5.2016.06.29.1 onwards. Notice all values shown in this chapter have been tested in an open field of a city. Depending on the environment where the iBKS Plus is placed these values might differ.
The following revision history table summarizes changes contained in this document.
www.accent-systems.
