User`s manual
English-11English-10
English
RAID Setup Step 2:
Press the <2> key. This should now show the LD View Menu, See Figure 14
below.
Figure 14. Dene RAID beginning Screen
RAID Setup Step 3:
Press <CTRL> <C> to dene a new RAID (See Figure). Press <ENTER> to
select the RAID mode See Table 1 for denitions of the currently supported
RAID modes. Then repeat pressing the <Down Arrow Key> until the rst
selected hard drive is highlighted. Then press the <Y> key to add to the
RAID, then press the <Down Arrow Key> and <Y> key until all the desired
drives are added to the RAID. (See Figure 15 below)
Figure 15. Dening RAID