User`s manual
Table Of Contents
- MPC-684 family
- The feature of the MPC-684
- Program development environment
- How to connect
- Input commands
- I/O check
- How to input program
- Edit of a program
- How to program save to the PC, load from the PC
- I/O control
- Variable, Array variable, String variable, Memory I/O
- Calculation
- Pulse generation
- Multi-task
- RS-232 communication
- Debugging
- Use touch panel
- Command List
Program development environment
Hardware
Personal computer OS: Microsoft Windows supported
Programming cable Connect to a MPC-684 and a personal computer by RS-232.
If the personal computer doesn’t have a RS-232 port, you should use a
USB-RS converter
Software
You can install software for MPC programming by “Setup Disk”.
You can down-load it from the ACCEL web site.
Main software
FTMW32E.EXE terminal software
FTMWE is the software which connects a MPC-684 and a personal computer
This is used for debugging your program it also reads/writes the program and point data for the PC.
This is indispensable to development.
SYSLDWE.EXE system loader
SYSLDWE is used for the MPC system version upgrade which rewrites flash-rom data to the MPC.
MPCEDE.EXE off line editor
MPCEDE is an off-line editor only for the MPC.
It classifies control sentences, labels and comments by color.
7