User Manual

4
Features
• Provides full display performance with virtually zero latency and no display application limitations.
• No additional software to install, just Plug-and-Play.
• Works with any desktop or notebook computer that has a DisplayPort (or Mini DisplayPort) output
• DP++, able to adapt to HDMI or DVI displays using passive or active adapters.
• Works on a DisplayPort enabled Windows PC or Macintosh computers.
• Reset button refreshes hub if monitor is not initialized
• Utilizes new Multi-Stream Transport (MST) protocols
• Scan button refreshes all connections made to the hub.
Please note, features and performance are subject to the capabilities of the computer and graphics solution.
Specifications
•
Connectors:
Built-in
locking
DisplayPort
cable
or
Mini
DisplayPort
cable
to
video
card
(L=7.25
”
)
Built-in USB cable for power (L=7.25”)
Two DisplayPort video outputs (female) to monitors
• Supports per lane data rates of 5.4Gbps (HBR2), 2.7Gbps (HBR) and 1.62Gbps (RBR)
•
Supports
resolutions
up
to
3840x2160@30Hz
or
2560X1600@60Hz
each
monitor
in
DP1.2
MST
mode
•
Supports
resolutions
up
to
FHD/1080p
in
DP1.1
(or
1.2)
in
SST
mode,
supports
ViewXpand
• Standards compliance: DisplayPort v1.2/1.1a, VESA DDM, HDCP V2.0 and EDID V1.4
• Features two DP++ output ports, adapt to any combination of 2 ports
• Input pixel data depth 6/8/10/12 bits and supports output pixel format RGB444
• Latency: Near zero
•
Approximate
dimensions:
2.52"(W)
x
2.29"(L)
x
0.54"(H)
•
Power:
USB
powered
• Highest Video Resolution Supported (DP 1.2 MST mode)
Resolution Refreshing Rate Reduced Blanking Pixel Frequency
3840x2160 30Hz RB 265 Mhz
2560x1600 60Hz RB 268 Mhz
1920x1080 60Hz RB 148.5 Mhz
1600x1200 60Hz 162 Mhz