Specification Sheet

Configuration
Accell Corporation
47211 Bayside Parkway. Fremont, CA 94538, U.S.A.
Tel: [phone] , Fax: [phone]
[e-mail]
www.accellcables.com
www.facebook.com/AccellCables
© 2015 Accell Corporation. All rights reserved.
Accell is a registered trademark of Accell Corporation.
Due to ongoing improvements, specifications are subject to change without notice.
Designed in the USA. Made in China.
Mirror or Extend your Desktop Over 2 Displays
• Graphic Output: DisplayPort (or Mini DisplayPort) v.1.1
or v.1.2 (for MST mode) or if not enough room
• Graphic Output: DisplayPort (or Mini DisplayPort)
v.1.1 or v.1.2
• Works on Windows PC and Mac OS computers
Package Includes:
• Multi-Display Adapter
• Instructions
• Works on DisplayPort (or Mini DisplayPort) enabled
Windows or Macintosh computers
• Utilizes new Multi-Stream Transport (MST) protocols
• Compatible with VGA, DVI & HDMI using optional adapters
• Compliant with DisplayPort 1.1a and 1.2 specifications
• Up to 5.4Gbps/lane link rate, bandwidth of 21.6 Gbps
• 5.4 bps (HBR2) -2.7 bps(HBR) -1.62 bps (RBR)
• Manual reset button refreshes MST hub
• Supports HDCP V2.0 and EDID V1.4
1 Display 3840x2160 @ 30Hz Not Connected
2 Displays 1920x1080 @ 60Hz 1920x1080 @ 60Hz
Monitors Supported Output Port 1 Output Port 2
DisplayPort 1.2 to 2 DisplayPort Adapter
Product Description Part Number UPC
Mini DisplayPort 1.2 to 2 DisplayPort Adapter K088B-005B 826388109377
K088B-004B 826388109360
The Accell UltraAV DisplayPort or Mini DisplayPort 1.2 MST Multi-
DisplayHub allows you to enjoy up to 2 displayPort monitors from a
single DisplayPort or Mini DisplayPort output. Available in DisplayPort
and Mini DisplayPort versions, the MST hubs utilize the new Multi-
Stream Transport (MST) protocol, supporting up to 2 displays
independently at 3840x2160 @30Hz or 2560x1600 @60Hz each with
DP 1.2 or HD 1080p with DP 1.1 single-stream transport (SST).
System Requirements:
Product Features:
ACCELL
WARRANTY
2-Year
REPLACEMENT
View a single image
over 2 monitors
View an application
on each monitor
The Accell UltraAV MST Multi-display Hubs support non displayPort
outputs, including VGA, DVI or HDMI. The MST Multi-Display Adapter
is DP++ and can actively convert the DisplayPort signal to other display
interface signals using active or passive adapters. You can choose to
view a single image across two displays, perfect for gaming, graphics
design or spreadsheet analysis. Easily dedicate each display to a
separate application, providing the efficiency and productivity of
multi-tasking.
UltraAV DisplayPort 1.2 to 2 DisplayPort Multi-Display MST Hub