Specification Sheet
USB-C VR Adapter
USB-C to HDMI and USB-A Adapter
J231C-008B-3 | 8 ft / 2.5 meter
Accell USB-C VR Adapter is an Oculus
TM
Ready accessory that’s designed to effortlessly
connect Virtual Reality Headset to computers for the best VR experience.
Minimum Requirement for Virtual Reality Headset
©2018 Accell Corporation. All Rights Reserved.
Specifications are subject to change without notice.
Accell is registered trademark of Accell Corporation.
ACCELL Corporation
Fremont, CA 94538
sales@accellww.com
Windows 10 operating system, must be equipped with USB-C (DisplayPort Alt-mode) port that
supports NVIDIA GTX 970 graphic card equivalent or greater.
Recommended Graphic Cards for Virtual Reality Headset
Laptop (with USB-C DisplayPort Alt-mode supported)
NVIDIA GTX 980, 980 Ti, 1060, 1070, 1080, 1080 Ti, Titan, Titan X, Titan Z
- The USB-C port combines both HDMI and USB-A signals into a single output providing power,
vibrant display and bandwidth that works best with NVIDIA® RTX GPUs.
- HDMI 2.0b features High-dynamic-range (HDR) that provide higher contrast, sharper details
and true-to-life image quality.
- 8 feet / 2.5 meters cable further extends your virtual reality headset for seamless VR
immersion, offering the true freedom of movement in your typical 8x8 ft room environments.
USB-CHDMI 2.0b
USB-A 3.0
8 feet extended freedom for true VR
immersion. Easy to connect, no
additional installation required.
Desktop
NVIDIA RTX 2060, 2070, 2080, 2080 Ti