System information

54
Press Buzzer to display or modify buzzer settings. See
Fig. 57.
Press System Settings to return to the System Settings
screen.
On the System Settings screen, press Intro screen to custom-
ize the Welcome screen (see the Welcome Screen section on
page 17). See Fig. 58.
General Display Settings — To set contrast, screen-
saver, screen image rotation, and touch screen calibration, press
Display on the Setup screen (see the section Touch Screen Set-
tings for the Controller on page 52). The Display screen opens.
See Fig. 59.
TOUCH SCREEN CALIBRATION — Depending on the
user and the position of the panel, it may be necessary to cali-
brate the touch screen if the cursor does not move precisely
with the user’s touch. When the user presses Touch Screen
Calibration, a white box with crosshairs appears on the display
screen. Touch the center of the crosshair sight with a touch pen
or similar blunt-ended stylus (do not use a metal object). When
the crosshair sight is touched, it moves to a new position; touch
the center of the crosshairs again. When all positions have
been configured, the crosshairs disappear. Click on the now
blank box on the display and check the precision of the setup
(the cursor should move with the user’s touch). This completes
the calibration and the white box disappears.
Touch Screen Configuration Language — To
set the language for touch screen configuration screens, press
Language on the Setup screen (see the section Touch Screen
Settings for the Controller on page 52). The Language screen
offers the options shown in Fig. 60.
NOTE: The language selection on this screen controls only the
display language for interface settings, not the language for the
unit application. See User Login Screen on page 18 for instruc-
tions on setting the unit application language.
System
System Settings
Buzzer
Order of file search
Delay during startup [s]
Intro screen
Local before remote
4
1
4
2
3
File cache enabled
Enter setup with delay
✔
✔
Fig. 56 — System Settings
LEGEND
1—Buzzer: Buzzer configuration
2—Order of file search: Local before remote. Do not modify.
3—Delay during startup(s): 4. Do not modify.
4—Intro screen: Information on the system start-up screen.
a19-2166
System settings
Buzzer
Buzzer on/off
Buzzer frequency
1000
1
2
Fig. 57 — Buzzer Settings
LEGEND
1—Buzzer on/off
2—Buzzer frequency configuration
a19-2167
a19-2168
System
Intro screen
Help
Welcome text
X-Position of the text
Y-Position of the text
Filename of the graphic
X-Position of the graphic
Y-Position of the graphic
Welcome
400
300
icoCarrier.gif
160
110
1
2
Fig. 58 — Welcome Screen Settings
LEGEND
1— Welcome message text; default: Welcome
2— Filename of graphic; default: ico.Carrier.gif (Carrier
logo)
Help
Setup
Display
i
Dimming
Backlight timeout [min]
Rotation
Touch screen calibration
10
15
0°
1
2
3
4
Fig. 59 — Display Settings
LEGEND
1— Dimming: Contrast control
2— Backlight timeout (min): Inactivity time until screen-
saver is displayed (screen goes black)
3— Rotation: Rotation of screen image
4— Touchscreen calibration
a19-2169
a19-2170
Fig. 60 — Touch Screen Configuration Language
English
German
French
Italian
Dutch
Language
Setup