System information
53
Enter the new address and validate it by pressing OK. Re-
turn to the Network screen and enter the subnet mask and de-
fault gateway using the same method. Then return to the appli-
cation and save the changes. See Fig. 52.
Web Address — This configuration is normally done at
the factory and is not typically modified in the field. To check
the parameters, on the Setup screen, press Web Connection to
display the web parameters. The Startup Connection screen is
displayed. See Fig. 53.
System Information, Buzzer Parameters, and
Welcome Screen Content —
On the main Setup
screen (see Touch Screen Settings for the Controller on
page 52), press System. The System screen is displayed. See
Fig. 54.
Press Info on the System screen to display the software ver-
sion and unit serial number. See Fig. 55.
On the System screen, press Settings to display the System
Settings screen. See Fig. 56.
Fig. 51 — TCP/IP Address Screen
a19-2162
Help
Network
TCP/IP Address
i
172
30
101 103
.
..
1
23
45
6
7
8
9
clr
prv
0ok
<=
=>
Fig. 52 — Save Changes
a19-2161
Save Changes
Revert
Some changes need to be saved!
What do you want to do?
Save
x
Startup Connection
Start Page
Type
Remote host IP
Remote port
hmi.html
httpDirect
127.0.0.1
80
Setup
Fig. 53 — Startup Connection
LEGEND
1—Start page: hmi.html
2—Type: httpDirect; not modifiable
3—Remote host IP: not applicable. Do not modify.
4—Remote port: not applicable. Do not modify.
a19-2160
Fig. 54 — System Screen
LEGEND
1—Info: Software version
2—Settings: Buzzer settings, information on Welcome
screen
3—Special: Reset to 0, flash formatting, clock parameters.
Do not modify.
4—Log: Unit start-up history
5—Firmware update (not applicable)
6—Unit reboot
a19-2164
System
Info
1
Settings
2
Special
3
Log
4
FW download
5
Reboot
6
Setup
a19-2165
Info
System
Firmware version
Booter version
Production data
Extension
Permanent video cache used 3913728
Flushable video cache used
1046784
1
2
3
4
Fig. 55 — System Information
LEGEND
1—Firmware version that loaded this software
2—Boot loader version that loaded this software
3—Software production data
4—Extended hardware details