System information

20
Schedule Menu Screen
— To access the Schedule menu
screen, press on the Configuration menu screen. Press the
arrows at the bottom right corner to navigate through the time
periods. See Fig. 25.
Status Display Screens
— Figure 26 shows the system status
overview (home) screen. Press any component on the screen to
see the status of that component. Press the arrows at the bottom
right corner to navigate through the component status displays.
Figures 27-33 show the component status displays.
SELECT THE
DAYS FOR
THIS PERIOD
SCHEDULE
SET THE
OCCUPIED
TIMES
SAVE CANCEL PREVIOUS
PERIOD
NEXT
PERIOD
OCCPC01S - Schedule Menu
Fig. 25 — Schedule Menu Screen
a19-2150
LOCAL Off
Fig. 26 — System Overview (Home) Screen
a19-2151
Entering Condenser Water
Leaving Condenser Water
Condenser Approach
Condenser Pressure Condenser Sat Temp
Condenser Status
Fig. 27 — Condenser Status
Evaporator Status
Entering Chilled Water
Leaving Chilled Water
Evaporator Approach
Evaporator Pressure
Evaporator Sat Temp
Evaporator Refrig Temp
Fig. 28 — Evaporator Status
Compressor Status
Compressor Running
Compressor Running Hours Compressor Starts Counter
Guide Vane Control Type
Discharge Temperature
Discharge Superheat
Actual Guide Vane Pos
Fig. 29 — Compressor Status
Fig. 30 — Motor Status
Motor Status
Motor Kilowatts
Average Line Voltage
Average Line Current
Motor Winding 1 Temp Percent Line Voltage
Percent Load Current
Motor Winding 2 Temp
Motor Winding 3 Temp
Economizer Status
Damper Control Type Target Damper Position
Actual Damper Position
Economizer Pressure Evaporator Pressure Pressure Difference
Fig. 31 — Economizer Status
NOTE: The pressure difference shown in this screen is the differ-
ence between the economizer pressure and the evaporator pres-
sure.