Instruction Manual

AH-TX Series Handheld Pulse Oximeter Instruction Manual
54
output power of
transmitter(W)
150 kHz to 80
MHz
P
V
d






=
1
5.3
80 MHz to 800
MHz
P
E
d






=
1
5.3
800 MHz to 2.5
GHz
P
E
d






=
1
7
0.01 0.12 0.12 0.23
0.1 0.38 0.38 0.73
1 1.2 1.2 2.3
10 3.8 3.8 7.3
100 12 12 23
For transmitters rated at a maximum output power not listed above, the
recommended separation distance d in metres (m) can be estimated using
the equation applicable to the frequency of the transmitter, where P is the
maximum output power rating of the transmitter in watts (W) according to
the transmitter manufacturer.
NOTE 1 At 80 MHz and 800 MHz, the separation distance for the
higher frequency range applies.
NOTE 2 These guidelines may not apply in all situations.
Electromagnetic propagation is affected by absorption and reflection from
structures, objects and people.
Appendix C Factory Defaults
This section lists the most important factory default settings. These settings
can be adjusted and you can load the factory defaults if you need.
C.1.1 Alarm Setup