Instruction Manual

AH-TX Series Handheld Pulse Oximeter Instruction Manual
26
1. SpO2 parameter area: Current SpO2 value and its upper and lower alarm
are displayed in this area.
The data average is done with an average of
ten data and the data update by every second.
2. PPG waveform area: The waveform shown in this area illustrates the
current PPG curve of the patient being monitored.
3. PR parameter area: Current PR value and its upper and lower alarm are
displayed in this area. The data average is done with an average of ten
data and the data update by every second.
5.5 SpO2 Alarm Setup
1. Select【Menu】→【Alarm Setup】.
2. Set the【SpO2 Level】to【Off】to shut off SpO2 alarm.
5.5.1 Setting the Alarm Levels
1. Select【Menu】→【Alarm Setup】.
2. Set the【SpO2 Level】to 【Med】or【High】.
Fig 5-1 Parameter and PPG Waveform