Instruction Manual

AH-TX Series Handheld Pulse Oximeter Instruction Manual
15
If you have made changes to the system’s configuration and want to restore
the original factory settings, follow this procedure:
1. Select【Menu】→【Load Default】.
2. A window will appear, asking you to confirm that you want to return to
the original configuration. Select【 】to restore the factory
configuration. If not, press the【 】or【 】to back to the previous
page
, also can press the【 】 to back the main page.
3.8 Shutting off the Oximeter
To shut off the oximeter, follow the steps below:
1. Confirm that patient monitoring is complete.
2. Disconnect the SpO2 probe form the oximeter.
3. Press the power button to turn off the oximeter.
Fig 3-3 Load Default window