Instruction Manual

AH-TX Series Handheld Pulse Oximeter Instruction Manual

3.5.1 Continuous Monitoring Mode

The continuous monitoring mode is intended for long-term monitoring of a

patient. This mode is normally selected when the patient is in hospital or

under transport. When the oximeter’s memory reaches full capacity, it will

stay in the last column.

Caution: Users should periodically clear the data manually.

3.5.2 Spot-checking Mode

Spot-checking mode is intended for short-term, on-site measurement. This

mode is normally selected to check up on the condition of a patient by

doctors making rounds of a ward.

Fig 3-3 Type select window