Instruction Manual

AH-TX Series Handheld Pulse Oximeter Instruction Manual

3.4.5 Scan Speed Setup

Press the Scan Speed to select the item, then adjust its value using the

“ ” or “ “ icon. You can select from 12mm/s or 25mm/s.

3.4.6 Date Setup

Press the Year / Month / Day to select the item, then adjust its value using

the “ ” or “ “ icon.

3.4.7 Time Setup

Press the Hour / Minute to select the item, then adjust its value using the

“ ” or “ “ icon.

3.4.8 Language Setup

Press the Language to select the item, then adjust the language type using

the “ ” or “ “ icon.

3.5 Selecting the Work Type

The oximeter is designed to operate in two types: continuous monitoring and

spot-checking. You can choose the oximeter’s work type through the

following steps:

1. Select【System Setup】→【Type】, then adjust the type using the

“ ” or “ “ icon.

 Spot: Work in spot check type, only record the measurement data

after removing the probe from your finger.

 10sec, 30sec, 1min, 5min, 10min, 30min: Work in continuous

type, every 10sec or 30sec or 1min or 5min or 10min or 30min

record the measurement data.