Instruction Manual

AH-TX Series Handheld Pulse Oximeter Instruction Manual

3.4.1 Alarm Volume Setup

Press the Alarm Vol to select the item, then adjust its value using the

“ ” or “ “ icon. You can select from 1 to 5. The volume will be

minimum when select is 1.

3.4.2 Beep Volume Setup

Press the Beep Vol to select the item, then adjust its value using the “ ”

or “ “ icon. You can select from 0 to 4. The volume will off when select

is 0.

3.4.3 Key Volume Setup

Press the Key Vol to select the item, then adjust the value using the “ ”

or “ “ icon. You can select from 0 to 4. The volume will off when select

is 0.

3.4.4 Adjust the Screen Brightness

Press the Brightness to select the item, then adjust the value using the

“ ” or “ “ icon. You can select from 1 to 5. Selecting the minimum

brightness can save power.

Caution: If the oximeter is used outdoors, or if the ambient light is

strong, set the screen brightness to a higher level.

If the user to turn off the physiological alarms totally, which may cause

the emergency event of the patient not be discovered in time. When the

alarm is completely turned off, this device should be used accompanied

by the professionals.

Fig 3-2(b) System setup window