Instruction Manual

AH-TX Series Handheld Pulse Oximeter Instruction Manual
9
 To avoid the risk of explosions, do not use the oximeter in the
presence of flammable anesthetics, vapors or liquids.
3.3 Starting the oximeter
Press the power button to turn on the pulse oximeter, the startup screen
appears and show the software version at the bottom right. Enter the main
screen, the alarm indication should light up and system should give a beep.
After starting the oximeter you can change the settings for more convenient
use, as shown in section 3.4. Enter the main screen, the alarm indication
should light up and system should give a beep. After starting the oximeter
you can change the settings for more convenient use, as shown in section 3.4.
3.4 General Setup
Press the menu button to enter【Menu】, then select【System Setup】to
enter the system setup menu shown as follows. You can set parameters for the
following functions: