Instruction Manual

AH-TX Series Handheld Pulse Oximeter Instruction Manual
3
1. PA: It is show the pulse amplitude, similar the PI.
2. SpO
2
(%): Display the SpO
2
unit.
3. SpO
2
parameter area: Current SpO
2
value and its high and low alarm
are displayed in this area.
4. Plath bar: Pulse intensity is indicated by the number of stacked blocks
visible.
5. Alarm status area: Alarm status symbols and alarm pause time are
displayed in this area.
6. Menu: Directly after startup, 【Menu】 shown here， is the function
controlled by the left hand button. When appropriate, press the left
button to enter 【Menu】.
7. Information: It’s show the manufacturer information.
8. PPG wave: It’s show the PPG waveform while press the symbol.
9. Heart icon: It will flash with the heartbeat.
10. Battery symbol: This symbol indicates the remaining quantity of
Fig 1-4 Big numeric display mode