User`s manual

AEC-6897/6897LP Manual

3. Refer to the following table for the number of hard drives and the Master/Slave

setting according to figure 2-1.

1EDI 2EDI 3EDI 4EDI

sevirDdraH2retsaMretsaMXX

sevirDdraH4retsaMretsaMretsaMretsaM

sevirDdraH6evalS&retsaMevalS&retsaMretsaMretsaM

sevirDdraH8evalS&retsaMevalS&retsaMevalS&retsaMevalS&retsaM

2.4 Compatibility

AEC-6897 is particularly designed for IDE hard drive, and has been tested compat-

ible with most main brands of hard drives as listed below.

C Quantum C Fujitsu

C Seagate C Hitachi

C IBM C Western Digital

C Maxtor

For the newest compatibility, please visit http://www.acard.com.

Table 2-1

NOTICE :

1. Hot swap is effective when AEC-6897 is used together with ACS-4600 (see

Appendix D).

2. Hot swap is effective only when one hard drive is connected to one IDE

channel.

3. Use the standard ATA 133 cable of 45 cm.