User`s manual

AEC-6897/6897LP Manual
7
Chapter 2 Hardware Installation
2.1 Quick Installation
2.2 The Adapter Layout
The layout of AEC-6897 board is shown as follows.
From this chapter on we simply take AEC-6897 as an example to explain.
(1). Be sure that the system power is off.
(2). Open the chassis of PC.
(3). Insert AEC-6897 into an available PCI slot firmly.
(4). Screw AEC-6897 onto the chassis.
(5). Connect AEC-6897 to the hard drives with an ATA 133 cable.
(6). Connect 4-pin power cords to the hard drives.
(7). Close the chassis, and power on the system.
IDE 3 IDE 1
LED
IDE 4 IDE 2
Pin 1 and pin 4 are +. Pin 2 and pin 3 are – .
Figure 2-1
1
2
3
4
LED Pins
+
+
–
–