User`s manual

AEC-6897/6897LP Manual
43
Chapter 6 Troubleshooting
After installing AEC-6897, if it cannot work normally, follow the checklist below for
problem solving.
(1). Inspect if the power cord’s connectors are loose, or if the wattage of power
supply is sufficient.
(2). Inspect if the jumper settings on the hard drives are set as table 2-1.
(3). Inspect if AEC-6897 is firmly inserted into the PCI slot.
(4). Inspect if the connectors of ATA 133 cable are loose or damaged.
(5). Inspect if the cable length is the standard ATA 133 of 45 cm.