User`s manual

AEC-6897/6897LP Manual
37
(3). The system will ask again if you want to delete. Confrim yes.
(4). Click “Save Changes”. The RAID and the hard drives’ data will be deleted.
Figure 5-19
5.2.3 Set Spare
In order to protect your data further, it is recommended to set a spare disk. When
Disk Array is damaged, if you have set a spare disk, the system will rebuild the Disk
Array automatically.
Under “System Info” click hard drives and “Set/Clear spare” at the bottom as figure
5-20 shows.
WARNING !
Make sure that you have made a valid backup of your existing data before
deleting any set of Array. ACARD is not responsible for any data loss caused
by the deletion.