User`s manual

AEC-6897/6897LP Manual
34
(1) (3) (4)
(2)
Figure 5-14
(4). Click “Save Changes”. Please see Figure 5-4.
The completion of RAID 5 is as figure 5-13 shows.
Figure 5-13
RAID 0+1
Please follow the steps below to create RAID 0+1.
(1). Under “Array Management” choose RAID 0+1 from RAID Mode.
(2). Choose the block size from Stripe Size. 128K is recommended.
(3). Double click HD to choose at least 4 hard drives.
(4). Click “Confirm Create”.