User`s manual

AEC-6897/6897LP Manual

(5). Click “Save Changes”. See figure 5-4.

The completion of RAID 1 is as the following figure shows.

Figure 5-8

B. Create Mirror for Exist Hard Disk

This method lets you take a hard drive as source drive. The data in the source drive

will be completely copied to the other drive to create RAID 1.

Please follow the steps below to create RAID 1.

(1). Under “Array Management” choose RAID 1 from RAID Mode.

(2). Click “Rebuild an existed array”.

(3). Double click HD to choose two hard drives (the first chosen one is source).

(4). Click “Confirm Create”. See figure 5-9.