User`s manual

AEC-6897/6897LP Manual
28
Figure 5-2
5.2.1 Create Disk Array
The RAID Utility helps you create RAID 0, RAID 1, RAID 5, RAID 0+1 and JBOD.
You need to click “Create Array” under “Array Management” first.
Figure 5-3
(1) (3) (4)
(2)
RAID 0
Please follow the steps below to create RAID 0.
(1). Under “Array Management” choose RAID 0 from RAID Mode.
(2). Choose the block size from Stripe Size. 128K is recommended.
(3). Double click HD to choose needed hard drives.
(4). Click “Confirm Create”.