User`s manual

AEC-6897/6897LP Manual

(4). Then click “Device Manager”.

Figure 4-7

(5). Double click “SCSI and RAID Controllers” to see if the card was installed suc-

cessfully.

Figure 4-8

4.3 Install OS to Disk Array

Please follow the steps below to install OS to the hard drives connected to AEC-

6897. Thus you can boot the system from AEC-6897.

(1). Find the support CD containing the driver of AEC-6897 from the package. Copy

the driver into a formatted floppy disk, and label it. Refer to Appendix B.