User`s manual

AEC-6897/6897LP Manual
18
1ksiD
2ksiD 3ksiD 4ksiD yticapaClatoT
0DIARG01G02
**
G02
1DIARG01G02
**
G01
5DIARG01G02G03
*
G02
1+0DIARG01G02G03G04G02
DOBJG01G02G03G04G001
3.2 Verify RAID Configuration
Move the highlight bar to “Information”, and choose RAID Device from the pull-
down menu by pressing <Enter>. Verify the RAID configuration as figure 3-25 shows.
Figure 3-25
3.3 Rebuild Disk Array
Table 3-1 The total capacity of different disk array
In Windows the AEC-6897 Utility can detect and rebuild Disk Array automatically
after replacing a failed hard drive with a new one. In BIOS you need to use “Rebuild”
to restore Disk Array manually. Here “Rebuild” is an alternative of data rebuilding
when you cannot start Windows.