User`s manual

AEC-6897/6897LP Manual
15
Second, choose three hard drives at least by moving the highlight bar, and press
the space bar to mark as figure 3-16 shows. An asterisk (*) will appear before the
chosen hard drive.
Third, the system will ask if the following information is correct. Please press <Y> to
confirm as figure 3-17 shows.
3.1.4 RAID 0+1
RAID 0+1 is striping+mirroring mode. It needs at least four hard dirves, and has the
advantages of quick read/write and fault tolerance.
First, move the highlight bar to “Create”, and choose RAID 0+1 from the pull-down
menu by pressing <Enter> as figure 3-18 shows.
Figure 3-18
Figure 3-16
Figure 3-17