User`s manual

AEC-6897/6897LP Manual

3.1.3 RAID 5

RAID 5 is striping with rotating parity mode. It requires three hard drives at least.

RAID 5 uses one hard drive to store parity data as fault tolerance. First, move the

hgihlight bar to “Create”, and choose RAID 5 from the pull-down menu by pressing

<Enter> as figure 3-15 shows.

Choose the source drive.

Figure 3-12

Choose the hard drive to which you intend to copy the data of the source drive.

Figure 3-13

The system will ask again if the information below is correct. Press <Y> to confirm.

Figure 3-14

Figure 3-15