User`s manual

AEC-6885MS/6885M/6885MLP

Rebuild

When a hard drive fails in the disk array of RAID 1 or RAID 0+1, this function will be

activated. It is to copy data from a normal hard drive to a new one.

Update Firmware

It is placed under Setup on the top function row. You can go to ACARD’s web site to

download the newest version of firmware. But if there is no problem in use, you are

recommanded not to update the firmware.

This function is somewhat different in OS 9 and OSX. In OS 9, it is independent. You

can see the updated utility in the same folder when you discompress the down-

loaded new firmware.

Information