User`s manual

AEC-6885MS/6885M/6885MLP

8. Quit “Disk Utility” and start the OSX 10.3 installation.

9. Then install RAID Utility (refer to 3.3) to monitor RAID volume and hard drives.

3.1.3 Verify System Profiler

For Mac OS 9

After you initialize the hard drive successfully, a new “Untitled” hard drive icon will

appear on the Mac window. Of course you can give the hard drive a name.

7. After partitioning or erasing the volume, you can click “First Aid” to verify the disk

partition into which you are about to install OSX 10.3.