User`s manual

AEC-6885 User’s Manual

3.1 Description of Functions

On BIOS screen use <á>,<â> to change items, press <Enter> to select and con-

firm, and press <Esc> to cancel or exit (return to previous screen). Meanwhile at the

bottom of the screen, you can see the model numbers of hard drives connected to

the channels, the capacity, the RAID status and class. For example, U5 represents

an Ultra 5 ATA100 hard drive.

3.1.1 Set RAID Modes

There are 8 arrays built in AEC-6885. You can build or change your RAID mode on

any array. Move cursor to “Set RAID Modes”, then press <Enter>, and Array 0 to

Array 7 will appear. There are four RAID and one normal (none RAID) modes for

selection once you press <Enter>. Set according to the prompt window. Please

refer to 3.2 for the explanation of each RAID mode. Yet, you are suggested to use

the Windows-based RAID Utility designed for AEC-6885. Its GUI is easy for opera-

tion. Please refer to Chapter 5.

Figure 3-3

NOTICE: You can set a new array from Array 0 to 7. The number is simply

for the system identification. After rebooting, the system will assign the

newly set array a smaller number. It begins with Array 0.