User`s manual

18
12. Adv Setup
5.1.1 UnderRun Protect
Now if you press ESC, you can enter Function 12 as the following figure shows.
12-01. Adv Setup
UnderRun Protect
5.1 Adv Setup
Function 12 Adv Setup lets you change the system configuration. This function includes 18
subfunctions: UnderRun Protect, Overburn, Read Error Skip, Format HDD, Verify HDD, Burn-in,
Update Firmware, Compare Firmware, H/W Diagnostic, Load Default, CD+G, ISRC & MCN, USB
Option, CD-TEXT, Password, Disc Counter, Auto Save Image, and Update Drive F/W. Refer to
page 15 for the menu.
Now press ESC to return to Function 11. Then, press ESC for 2 seconds to enter Function 12-01
as the following figure shows.
UnderRun Protect lets you control On and Off of Buffer Under Run Protection. Press ENT to enter
the following figure. The default is On. Press t to select Off.
UnderRun Protect
On
5.1.2 Overburn
Now press ESC and ▼ to enter the following figure. Overburn lets you decide whether to copy
beyond the limit of the CD or not.
During operation if you don’t understand an LCD message, see Appendix A . Now let’s take
ARS-2040P to demonstrate.
Press ENT to enter the following figure. The default is Off. Press ▼ to select On. Overburn may
cause a DVD writer to be damaged and data incomplete.
Overburn
Off
12-02. Adv Setup
Overburn
5.1.3 Read Error Skip
Now press ESC and ▼ to enter the following figure. Read Error Skip is to ignore any error that
occurs during copying. Under normal circumstances, when an error occurs during copying, a
message will appear on LCD. Yet, you can use Read Error Skip to copy some defective DVDs.
ARS-2057/2050/2050P Manual