User`s manual

95
2030T/2033/2033P/2033S/2039
Appendix B LCD Messages
1. Normal Conditions:
All data will be lost, erase?.........All data on the disc will be lost. Confirm the
erasing of data.
Analyzing............................................................................Analyze the source disc.
Audio Disc!!! Can’t compare!............... The system cannot compare the audio discs.
Cannot read TOC................................. The system cannot read the contents of disc.
Check Target Please Wait ........................The system is checking the target device.
Detect Drives..............................Detect what drives are connected with the system.
DVD-RW does not Support the Func.......... DVD-RW doesn’t support this function.
Erase Finished................................................. The erasing of data comes to an end.
Erasing disc..............................................The system is erasing the data on the disc.
Fail to get Drive Info!.................................. The drive information cannot be obtained.
Fail to get Src Disc Info!............. The information of source disc cannot be obtained.
Hold ESC to exit................................. Press ESC for a second to terminate the test.
Identical.......................................................... The comparison results are the same.
Initialize SDRAM............................................Initialize the memory of the system.
Load Default Config?...............................Do you want to load the default settings?
No Erasable Disc in DVD-RW!!.......The disc on the DVD-RW device is not
rewritable.
Preparing............................................................. The system is preparing to record.
Press a Key to Eject Fail Disc......Press any key to eject the failed disc after copying.
Press a Key to Eject Good Disc... Press any ket to eject the good disc after copying.
Read disc error .....................................During comparison the disc cannot be read.
Save new config Fail!................ The new setting of configuration cannot be saved.
Source Disc Empty!!!............................... The source disc doesn’t contain any data.
Source Disc Not Ready....................................... Source disc is not ready to be read.
Source Drive Not Ready........................................Source drive is not ready to read.