User`s manual

88
2030T/2033/2033P/2033S/2039
After connection and linking to the computer, once the copy controller detects the
hard drive, it will ask if you want to format. Then, you can press ESC on the copy
controller’s panel for 2 seconds, enter Function 12. Adv Setup, and select Switch
USB Mode. Press ENT to see “USB L.H Mode” display on the LCD. You can also
click “My Computer” to check if there is a hard drive appearing.
Connection with a hard drive means transmitting those image files stored in the
system’s hard drive to the newly connected hard drive via the software Image
Manager, and then copying the files to the target writer. See Part 10.
Visit ACARD’s Web site for the compatibility list of hard drives.
8 Connect 4420PB to Writer
The picture below shows the connection of 4420PB with a writer. 4420PB cannot
connect with a hard drive. Its function is the same as that of 4420P. See page 20 to
22 for the connection of the 2-pin signal line.
Controller Copy Smart Plus
DVD-ROM
DVD-RW
To PC USB Port
AEC-4420PB
Internal
USB Cable
Device