User`s manual

2030T/2033/2033P/2033S/2039

After connection and linking to the computer, you can press ESC on the copy

controller’s panel for 2 seconds, enter Function 12. Adv Setup, and select Switch

USB Mode. Press ENT to see “USB L.H Mode” display on the LCD. You can also

click “My Computer” to check if there is a new DVD writer appearing. Now you

may use some recording software like ACARD Ha! DVD Burner to copy.

If you want to stop linking host, you can press ▲ on the copy controller’s panel and

see “Back to SA-Mode? Yes” display on the LCD. Press ENT to return to standalone

mode.

Visit ACARD’s Web site for the compatibility list of writers.

7 Connect 4420P to HDD

The picture below shows the connection of 4420P with a hard drive. It is similar to

the connection of 4420P with a writer. When the copy controller is in link host

mode, the data stored in PC can be transferred to the hard drive on the copy control-

ler in the form of image files. After transfer, the copy controller can be switched

back to standalone for data recording. See page 20 to 22 for the connection of the 2-

pin signal line.