User`s manual

2030T/2033/2033P/2033S/2039

Press ENT to enter the next figure, and begin the LCD test. After that, the system

will do the button test, self-test of SDRAM, the hardware connection test and flash

test. All test results will be shown on LCD. It is the easiest way to know if the system

can work well.

5.12.8 Compare Firmware

Now press ESC and ▼ to enter the following figure. Compare Firmware is to compare

the current firmware version and the newly downloaded version. It can prove if the

downloaded version is the newest one.

12-08. Adv Setup

Compare Firmware

5.12.9 H/W Diagnostic

Press ESC and ▼ to enter the next figure. H/W Diagnostic is to test the system.

12-09. Adv Setup

H/W Diagnostic

LCD Test Start