User`s manual

2030T/2033/2033P/2033S/2039

Press ENT and use ▲ ▼ to select the time of simulation such as 1, 2, 3...1000 or

Run Continuous. The figure below shows Run Continuous.

5.12.7 Update Firmware

Now press ESC and ▼ to enter the following figure. Update Firmware is to update

firmware to the latest version. But you should get the version first.

12-07. Adv Setup

Update Firmware

Sel burn-in num:

Run Continuous

You can get the newest firmware version from ACARD by e-mail, or download it

directly from the web site: http://www.acard.com Then, unzip the file of .zip and

copy it into a CD-RW. If the file is .bin, you don’t need to unzip.

After placing the DVD into the DVD-ROM , press ENT. The system will begin

searching the new firmware and show the message on LCD as follows after it finds

the new firmware. Then press ENT to update.

Searching F/W---

XXX/XXXXX