User`s manual

71
2030T/2033/2033P/2033S/2039
Press ENT and use ▲ ▼ to select the time of simulation such as 1, 2, 3...1000 or
Run Continuous. The figure below shows Run Continuous.
5.12.6 Burn-in
Now press ESC and ▼ to enter the following figure. Burn-in is to simulate the
copying progress many times. The time can be from 1 to 1000. After each cycle of
simulation, the DVDs on the DVD writers will eject automatically and recede for
the next bout of simulation.
12-06. Adv Setup
Burn-in
Press ENT to enter the next figure. Test is simply a simulation.
Burn-in
Test
Sel burn-in num:
Run Continuous
Press ESC, ENT, ▼ to select Erase & Copy as the following figure shows. Erase &
Copy is to erase and write repeatedly. It is only for DVD rewriteable discs.
Burn-in
Erase&Copy