User`s manual

2030T/2033/2033P/2033S/2039

If your copy controller doesn’t connect with a hard disk, LCD will show the message

as follows.

5.12.5 Verify HDD

Now press ESC to return to Function 12, and then select part 5 Verify HDD as the

following figure shows. Verify HDD is to verify if the hard disk or any of its partitions

can work well.

There is no HDD!

12-05. Adv Setup

Verify HDD

Press ENT to enter the next figure. Use ▲ ▼ to confirm Disk or Parti.

Verify Disk or

Partition? Disk

Press ENT to verify. After verification LCD will show the results as follows.

Verify Hard Disk

OK!