User`s manual

60
2030T/2033/2033P/2033S/2039
Press ENT to enter the following figure. The default is On. Press ▼ to select Off.
If your copy smart plus doesn’t connect with a hard disk, LCD will show the message
as follows.
No Valid HDD !
5.11.12 Burn Mode
Now press ESC to return to Function 11, and then select part 12 Burn Mode as the
following figure shows. Burn Mode lets you control the burning modes. There are
two modes: DAO (Disc At Once) and TAO (Track At Once). They only supports
CD. If the DVD writer doesn’t support the mode you have selected, the copy
controller will automatically switch to another mode.
Press ENT to enter the next figure. The default is DAO. Press ▼ to select TAO.
Burn Mode
DAO
11-12. Setup
Burn Mode
Burn On The Fly
On