User`s manual

2030T/2033/2033P/2033S/2039

Press ENT to enter the following figure. The default is Eject Good Only. Press ▼ to

select Eject All Disc or Do Not Eject.

Eject Disc

Eject Good Only

5.11.11 Burn On The Fly

Now press ESC and ▼ to enter the following figure. Burn On The Fly lets you

control the copying methods. When the setting is On, the data will be copied directly

from the source DVD to the target DVDs. When the setting is Off, the data will be

loaded into a partition of HDD first, and hence copying will be done.

11-11. Setup

Burn On The Fly

5.11.10 Eject Disc

Now press ESC and ▼ to enter the following figure. Eject Disc provides three

choices. They are Eject Good Only, Eject All Disc, and Do Not Eject. Eject Good

Only means that the DVDs will eject automatically only when they are copied

successfully. Eject All Disc means that the DVDs will eject automatically whether

they are copied successfully or not. Do Not Eject means that you need to eject the

DVDs manually when copying finishes.

11-10. Setup

Eject Disc