User`s manual

2030T/2033/2033P/2033S/2039

5.9 Image

Function 9 Image is valid only when you have installed a hard disk. This function

includes 7 subfunctions: Load, Delete Image, Image Info, Compare Image, Select

Image, Select Src Drive, and Image Format Info. The loaded data is called an image

file. Refer to page 24 for the figure of menu.

Select function 9.

5.9.1 Load

Now press ENT, and you will enter the following figure. Here the function Load is

to let you load data from DVD-ROM or any one of the DVD writers into the current

partition of the hard disk. “P:A” means partition A.

Press ENT to load. LCD will show the loading information as follows.

Load- A - DVD 0%

4213.4MB 7:30

9-01. Image P: A

Load

9.Image