User`s manual

18
2030T/2033/2033P/2033S/2039
l When copying comes to an end, the passed DVDs will eject automatically.
The default is ejecting automatically, but you can change it.
l The failed DVDs will remain in the writers. The default is keeping failed
DVDs in the writers, but you can change it. To take the failed DVDs you
need to press the “eject” buttons on the writers.
l During operation do not press any button on your copy controller, because
interruption will harm the device, and DVDs will be damaged, too.
3.2.2 Without a HDD
If you haven’t installed a 3.5” hard disk to your copy controller, you need to operate
according to the following procedures.
l Place a source DVD into DVD-ROM.
l Switch to function 1 Copy by pressing ▲ . Place blank DVDs into DVD
writers, and press ENT to start copying.
l When copying comes to an end, the passed DVDs will eject automatically.
The default is ejecting automatically, but you can change it.
l The failed DVDs will remain in the writers. The default is keeping failed
DVDs in the writers, but you can change it. To take the failed DVDs you
need to press the “eject” buttons on the writers.