User`s manual

17
2030T/2033/2033P/2033S/2039
3.
1. Copy
3.2 About HDD Installation
HDD installation is not necessary, but with a hard disk you can use the function of
Image. In other words, you have one more choice to reproduce a DVD from an
image file stored in the hard disk. The following two subsections are about installing
a 3.5” hard disk and not installing respectively.
3.2.1 With a HDD
If you have installed a 3.5” hard disk to your copy controller, you need to operate
according to the following procedures.
l Once your copy controller detects the hard disk, it will ask if you want to
format. A 30GB of hard disk can be divided into 6 partitions. In DVD a
partition occupies 5GB, in CD 1GB and in DL 10GB.
l Use function 8 Select Source to set the hard disk as the source.
l In function 9 Image, select a partition to store the data.
l If there is no data in a selected partition, place a source DVD into DVD-
ROM, and use function 9-01 Load to transmit data from DVD into the
selected partition by pressing ENT. Different data can be stored in different
partitions.
l Switch to function 1 Copy by pressing ▲ . Place blank DVDs into DVD
writers, and press ENT to start copying.
Figure 3 shows the first function Copy. There are 12 functions. You can press ▼ to
see other functions.