Specifications

38
ARS-2030/2032 Copy Smart Plus
UnderRun Protect
On
12-02. Adv Setup
Overburn
Overburn
On
12-03. Adv Setup
Read Error Skip
12-01. Adv Setup
UnderRun Protect
Press “ENT” button to enter “UnderRun Pro-
tect” and “ESC” to exit.
5.12.2 Overburn
This setting controls turns on the CD writer which has overburn
function. Default setting is “Off”.
5.12.3 Read Error Skip
This setting controls error skipping during source is reading. The
default setting is “Off”. When an error is detected during source
loading, the duplicator will stop to load and display read error
message. If the setting is “On”, there will be no message shown
even there is an error in reading. You can use this function to copy
some CD with errors.
5.12.1 UnderRun Protect
This setting controls On and Off of Buffer Under Run Protection (ex.
Burn Proof, SafeBurn, JustLink, Seamless Link...etc.). Default setting
is “On”.
Using arrow button to change “On” or “Off”
setting then press “ENT” or press “ESC” to go
back 12-01 manual.
Press “ENT” button to enter “Overburn” and
“ESC” to exit.
Using arrow button to change “On” or “Off”
setting then press “ENT” or press “ESC” to go
back 12-02 manual.
Press “ENT” button to enter “Read Error Skip”
and “ESC” to exit.