Specifications

11
ARS-2030/2032 Copy Smart Plus
Two different main operation procedure are required to install the duplicatior with:
1. With hard drive installed
! !
! !
! Duplicator will detect the hard drive and create partitions for it (each partition
will have 1G capacity, e.g. 10GB Hard Disk will probably have 10 partitions
which it is included 9 working partitions and 1 TEMP partition)
! !
! !
! Use the Select Source to set the hard drive being the target source.
! !
! !
! Then select which partition to store the data in the “Image” in Main Menu.
! !
! !
! If there is no data stored in present/selected partition of hard drive, press the
arrow button to select “load” function and place the master disc into the CD-
ROM, then press “ENT” button to load data into the present/selected
partition. Change another master disc for data loading. Master data can be
stored in different partition switch to that particular partition (Please refer to
Image) for loading.
! !
! !
! Switch to Copy function by pressing arrow button. Place blank CD-R or CD-
RW discs into all the CD writers. Press “ENT” button to strat copying when
all writers detect the CD discs.
! !
! !
! When Copy is completed on all CD writers, those CD discs passed will be
ejected automatically (default setting: Passed discs will be ejected. This can
be changed according to your setting). For continuous duplication, place
additional blank discs into the CD writers and repeat the above procedures.
! !
! !
! Failed disc(s) will remain in respective CD writer(s) (Default setting: Failed
disc NOT ejected. This can be changed according to your need). Press
each eject button on the CD writer to eject disc manually.
! !
! !
! The duplicator will prompt you an error message when you try to copy a
partition that contains no data. In this case, please switch to “Load” function
to load data first.
! !
! !
! Do not press any button on duplicator during operation as interruption/
termination of operation will cause error and might cause the duplicator to
hang up (depend on writers installed). The CD-R discs will be ruined and
can not be used again.